Brightness Controller v3.03Author: Mc_kibel.
Change log V3.03-In v3.03 - small bug with increasing/decreasing brightness when ES and IAB are on - FIXED. Now works perfectly.
*ES - EnergySaver System™
**IAB - Inteligence AutoBacklight™
-EnergySaver System and Inteligence AutoBacklight System FINALLY ADDED!!Works perfectly on DB2010 & DB2020!!
You need in library: 828A, 828B, 8141, 81B8, 31C, 31D - otherwise phone will restart!!
Elf supports two mode of work - MANUAL and AUTO
1. Installation-Put an elf into ZBin or Daemons and run it!
-BCFG file will be created in config folder on memory stick
-If memory stick is not present, BCFG will be created on internal memory in Config folder
2. Options-BCFG Support!:
#
[*]You can change the keys for increasing / decreasing brightness and key mode (default: volume up / volume down [short press] for DB2020)
[*]You can disable MessageBoxes with information "Brightness Increased" / "Brightness Decreased" !
[*]You can disable brightness control, when media player/radio/camera/screensaver/video player are on!
[*]You can enable/disable EnergySaver System (TM) !!
-EnergySaver system is a great option: When we have less than XX% of battery left, brightness will be decreased to value from BCFG.
For example: If we enable this option, and if we set Battery percent to 15, and decrease to 10, if we have less than 15% of battery left, brightness will be decreased to 10%.
[*]You can enable/disable Inteligence AutoBacklight (TM) !!
-This option sets automatically brightness level according to hour. We can set three different brightness level in BCFG
== from 8:00 to 17:59
== from 18:00 to 20:59
== from 21:00 to 7:59
[*]If Inteligence AutoBacklight™ or EnergySaver are on, Automatic work mode is on. If automatic work mode is on, you can't increase/decrease brightness manually. You need to disable AutoBacklight if you want to manually change brightness (and EnergySaver too - but only, when you have less than XX% of battery left) !
[*]You can use both systems (Inteligence AutoBacklight and EnergySaver System) at the same time!! There are three most advanced conditions, so there is no problem to use both systems at the same time! :)
[*]Elf has security for "out of range" brightness level - if brightness level is equal to 100%, code for improving brightness is not performed, so do not worry ;)
3. Thanks to:-Zylka from CentrumSE.pl for any help
-Edgpaez for disable brightness regulation when media player or radio is on!
-SE-Developers.net and CentrumSE.pl community for ideas!
[ Редактировано Thilina в 19.5.09 20:09 ]
[ Редактировано Thilina в 19.5.09 23:16 ]
[ Редактировано Thilina в 19.5.09 23:50 ]
[ Редактировано Thilina в 19.5.09 23:50 ]