Developer

 

SEns9x is an port of Snes9x - an emulator of Super Nintendo Entertainment System also known as Super Famicom.


2009-2010
Port to SE by:
MaW, mc_kibel, Marian90
Thanks to: Tartes

SEns9x is based on Siemens elf by CBN programmers and Miha_r.
Port uses also some UIQ Snes9x solutions.

http://www.youtube.com/watch?v=rTBbYlxcjUs

We do not take any responsibility for any phone problems possibly caused by this elf, especially the older versions that reboot on exit.

1. System Requirements:
- a DB2020 or better Sony Ericsson phone
- 2,5(depending on settings)MB + rom size of free heap(actually, for a 4MB game the emulator needs 5-6MB, but I noticed phone gets ustable when it has below 1-1,5MB free heap)
- an Elfpack installed

2.Usage:
1. Put SEns9x.elf into Zbin folder.
2. Put SEns9x.png into Zbin/Config/Extension and add the line from ext.ini.txt to your phone's ext.ini. Change [EXTxx] to next available number. Update extensions with FileReg.elf or w/e elf that does that too.
3. Put ROM.smc (ie. Chrono Trigger.smc) in other/snes/ folder.
4. Run the emulator by clicking open on the .smc file or by running elf and choosing game from the list (game must be in other/snes/ folder for the second option)

3. Menu Usage:
We enter the menu by pressing right softkey. Entering menu also pauses the game. Most of the options are understandable, I'll just briefly explain some:
BG Layers - allows us to turn off background layer, useful in games that need transparency support (which SEns9x doesn't support for now)
Emulation Settings (Advanced) - we can modify there CPU settings to gain perfomance in some games, we can aswell edit Memory Settings to reduce memory usage: In most of games you can safely set SRAM to 8kb, although if the game needs SRAM bigger than 8kb, it can cause phone's reboot, you'd also lose your previously saved games. TILE memory can be set in range between 32-128, however setting it below 64 can cause graphics problems aswell as reboot the phone. It should work fine at 50 though, in some games at least.


4. Keys Settings
Key settings work same as in NesCube.
Function keys:
KEY TURBO FSKIP - turns on/off frameskip 15
QUICK LAYER - this key allows us to quickly turn on/off background layers that we have chosen in settings

5. Saving game:
While the quick save/load options in main menu don't work, you can save game using the original SNES's saving method - to the emulated game's memory (SRAM). You can save this way only in games that allow you to save this way. You can also import your saves from PC version of Snes9x, you just need to remember to keep same names, i.e when you have Game.smc you need the SRAM file to be named Game.srm.


6. FAQ
Will SEns9x emulate sound?
Unfortunately, elfpack seems to not have any function that would allows us to include sound emulation. At least in a way that would work properly.

Will SEns9x support custom chip games (i.e Doom - Super FX chip, Super Mario RPG - SA1 chip).
I'm afraid Super FX chip is too demanding to emulate on our SE phones. Adding SA1 coprocessor emulation is easy, but games that use it work too slow, so I didn't include it to SEns9x release to not make elf bigger. Maybe A2 phones will [no, they don't...]have enough power for SA1

Will Load/Save options in main menu work?
Hell, they do!

When will next version be released?
No idea. Might as well be never.

version history:
v0.19 - initial test release
...
v0.50, v0.53, v0.55, v0.56, v0.56r, v0.6, v0.61
v0.65 - current release

Regards,
MaW





[ Редактировано okejokej в 11.5.10 17:30 ]

Patcher

 

And it is possible to make Key Settings as in NesCub.jar? That buttons for certain action were adjusted. And that there was on some buttons.

For example Joy (UP) and Joy (LEFT) it is the button 3...

And I have a little brakes in game
Good work! Do not stop!

Lost_Vikings_II work fine


[ Редактировано PRO100light в 8.1.10 14:19 ]

Бывалый

 

Скажите пожалуйста вот с этого сайта www.emu-land.net с какого именно раздела качать игры?

Пользователь

 

а можно ли добавить,такую функцию при помощи которой можно было бы назначить два действия на одну кнопку,например назначить прижок и влево на кнопку "1",таким образом получим прыжок в сторону,ведь чтобы прыгнуть в сторону приходится нажимать одновременно две клавиши а на телефонной клавиатуре это очень не удобно.

Вникающий

 

16ty78 писал:

Выбираем слева Консоли - SuperNintendo - ROMs/Игры
В центре страницы появляется 0 1 2 ..A B C... Прочее Популярные Рейтинг
Жмакаем либо на цифру-букву, а я обычно на "Популярные". Ниже открывается таблица с играми и описаниями.


[ Редактировано SilveRain в 9.1.10 21:55 ]

Бывалый

 

У меня поЧемуто ни одна игра не открывается тоесть горит то желтый то белый то оранжевый экран! В чем дело? Хотя точно знаю все работает у меня одна игра идет хорошо правда качал с другого сайта! Если можете выложите какие нибудь игры которые точно идут пожалуйста

Вникающий

 

Ultimate Mortal Combat 3 точно идет. Еще Desert Strike например. Выкладывать здесь не буду, там смотри.

[ Редактировано SilveRain в 9.1.10 23:20 ]

VIP Developer

 

okejokej,
small advice: use some like this in page actions to block keys (walkman, go music, etc.)
Код:

you can see this in "keyinput.cpp" BcfgEdit project

Developer

 

v0.53, no big improvements though =P:
- Elf should exit correctly both by Exit in menu and by BookManager,
- 270 degree screen rotation added
- a "MULTI KEY" added
- added a "QUICK LAYER" key
- elf doesn't take extra memory when scaling to 176*220 screens
- some keys like walkman key are disabled when the elf is running. You can of course still enter the player by minimalizing SEns9x in BookManager and entering main menu.
(thanks to IronMaster for the idea)
- modified advanced options

That's all I remember since I didn't work much for a while xD
I might make Nescube-like key settings later if will be needed.

The file has been added to the first post, also the first post has been modified.

Patcher

 

okejokej писал:

I will be grateful!

Developer

 

Well okay I'll look at it, however the way I see it, it doesn't seem to be such a good idea - the keys kinda work slow already.

For now, you can use the MULTI KEY to, for example, run and jump at once =P