Patcher/Elfmaker

 

Welcome!

After very very long break with developing ClearBass elf, I decided to completely rewrite this elf.

I fixed ALL bugs and improved some things. In this version:
- Saving last preset and restoring it after restart of player (you don't have to set preset everytime )
- When you go to equalizer, you will see last opened equalizer and last presets
- SWFs are not used anymore!
- Support for DB2020, DB3150, DB3210

Comparing to older DB2020 version, there are some more important changes:
- Now only one elf is working, not three (it was manager, manual, presets)
- Affecting sound in real time (you don't have to press 'select' to hear the difference)
- Huge code optimization

Warning!
Needed events:
Код:
At the moment these are not preset in any A2's dyn_const.bin, so I spend some time for porting it. Dyn_const for DB3150v1 (ported by Madfish) / DB3150v2, DB3210 and DB2020 in attachment.

1. Installation
- First of all - remove everything connected with old version!
- Install patch:
Код:

Here's ASM for porters:

- Download ClearBass.elf and place it to ZBin or Daemons
- Download equalizer.zip
- Exract it, place all files from archive to /Zbin/Config/Equalizer [phone memory]
- Download Equalizer_Display_QVGA.zip - put Equalizer_Display.xml from this archive to /Zbin/Config/Equalizer [phone memory]
- Run elf

2. Usage
- Start music
- Press more -> settings -> equalizer
- That's all, now you can play as long as you want :D




3. Replacing ClearBass presets (creating EQS files) - Optional, not necessary
- Let's take a look at this screenshot:


- Let's create EQS file with this preset. We can see:
-->> in 1st band: 14
-->> in 2nd band: 14
-->> in 3rd band: 4
-->> in 4th band: 5
-->> in 5th band: 6

- Count: visible level - 8 + 20
- In this case:
-->> for 1st band: 14 - 8 + 20 = 26
-->> for 2nd band: (same as first) 26
-->> for 3rd band: 4 - 8 + 20 = 16
-->> for 4th band: 17
-->> for 5th band: 18

- Convert value to hex
-->> for 1st band: 0x1A
-->> for 2nd band: 0x1A
-->> for 3rd band: 0x10
-->> for 4th band: 0x11
-->> for 5th band: 0x12

- Write values into file by WinHex:


- Save file as PresetX.eqs (number of preset instead of X, 1-9), then put it to ZBin/Config/Equalizer in phone memory.

Changelog:



[ Edited by mc_kibel в 20.7.10 19:57 ]

Новичок

 

You can port this patch to w760 R3EF001 ?

[ Редактировано RAZOR_911 в 21.5.10 22:02 ]

Новичок

 

You can port this patch to w910 R1FA037 please

Patcher/Elfmaker

 

Here is the source if you want to port it:
http://centrumse.googlecode.com/svn/trunk/A2%20ClearBass%20Equalizer%20Add-on%20Patch/

Новичок

 

With IAR ? You can teach me port pathes


Добавлено 23.5.10 11:55

mc_kibel, I can translate Equalizer.swf to Russian?

Patcher/Elfmaker

 

Port addressess in target and in xcl, then compile it and use elf2vkp.

Yes, of course you can :) .fla files: http://centrumse.googlecode.com/svn/trunk/A2%20ClearBass%20Equalizer/Flash/

Новичок

 

You cant port patch please for me ?!
Instead, I will translate into Russian)
You can find me in ICQ 364142879

[ Редактировано RAZOR_911 в 23.5.10 15:34 ]


Добавлено 23.5.10 18:07

I translate ! Who do you want?

Elfmaker

 

On K850 works fine, selecting presets but don't change them. Is it elf problem or there something wrong in usage, or in my phone?

Вникающий

 

запускаю эльф из /card/other/equalizer/ но в букмене он непоявляеться, как понять что он запущен? второй раз нажимаю на него, он не пишет ничего, как букман например при втором запуске пишет что уже запущен

Вникающий

 

Venom25, в первом посте есть инструкция. Советую почитать
Код:

Опытный

 

Venom25, если ты запустил эльф, у тебя уже открылся эквалайзер!