Patcher/Elfmaker

 

Welcome!

After very very long break with developing ClearBass elf, I decided to completely rewrite this elf.

I fixed ALL bugs and improved some things. In this version:
- Saving last preset and restoring it after restart of player (you don't have to set preset everytime )
- When you go to equalizer, you will see last opened equalizer and last presets
- SWFs are not used anymore!
- Support for DB2020, DB3150, DB3210

Comparing to older DB2020 version, there are some more important changes:
- Now only one elf is working, not three (it was manager, manual, presets)
- Affecting sound in real time (you don't have to press 'select' to hear the difference)
- Huge code optimization

Warning!
Needed events:
Код:
At the moment these are not preset in any A2's dyn_const.bin, so I spend some time for porting it. Dyn_const for DB3150v1 (ported by Madfish) / DB3150v2, DB3210 and DB2020 in attachment.

1. Installation
- First of all - remove everything connected with old version!
- Install patch:
Код:

Here's ASM for porters:

- Download ClearBass.elf and place it to ZBin or Daemons
- Download equalizer.zip
- Exract it, place all files from archive to /Zbin/Config/Equalizer [phone memory]
- Download Equalizer_Display_QVGA.zip - put Equalizer_Display.xml from this archive to /Zbin/Config/Equalizer [phone memory]
- Run elf

2. Usage
- Start music
- Press more -> settings -> equalizer
- That's all, now you can play as long as you want :D




3. Replacing ClearBass presets (creating EQS files) - Optional, not necessary
- Let's take a look at this screenshot:


- Let's create EQS file with this preset. We can see:
-->> in 1st band: 14
-->> in 2nd band: 14
-->> in 3rd band: 4
-->> in 4th band: 5
-->> in 5th band: 6

- Count: visible level - 8 + 20
- In this case:
-->> for 1st band: 14 - 8 + 20 = 26
-->> for 2nd band: (same as first) 26
-->> for 3rd band: 4 - 8 + 20 = 16
-->> for 4th band: 17
-->> for 5th band: 18

- Convert value to hex
-->> for 1st band: 0x1A
-->> for 2nd band: 0x1A
-->> for 3rd band: 0x10
-->> for 4th band: 0x11
-->> for 5th band: 0x12

- Write values into file by WinHex:


- Save file as PresetX.eqs (number of preset instead of X, 1-9), then put it to ZBin/Config/Equalizer in phone memory.

Changelog:



[ Edited by mc_kibel в 20.7.10 19:57 ]

Пользователь

 

Если я правильно все понял, то этот эльф будет работать только с новым ЯП, а почему тогда не работает стандартный эквалайзер? Из за патча верно?

Бывалый

 

chkofe,
Wrong. У меня новый ЭП (Вчерашний). Версия 2.0 - норм, 2.1 - ребут. У Sotik'а ЭП от Тартеса. И у него тоже версия 2.0 - норм, 2.1. ребут. А стд не фурычит из-за патча, ты прав.

Patcher/Elfmaker

 

Elf is tested on K770 and C901 - it's working on both.
Did you place Equalizer_Display.xml in ZBin/Config/Equalizer in phone memory??

Edit: Someone wrote, that when he had folder called 'equalizer' (from small leter) phone was crashing (db2020), so try to remove current equalizer folder (from phone and card, if needed) and create new, 'Equalizer'.

Patcher

 

Also guys delete old Lastsettings.eqd file before starting elf 2.1
This stopped reboots I was having

Patcher/Elfmaker

 

Ah, and take notice, that files must be placed in INTERNAL memory / ZBin / Config / Equalizer [not in external, like before].

Бывалый

 

mc_kibel,
done all. Stil reboot

Patcher

 

mc_kibel писал:

yes I did
mc_kibel писал:

this is not helped too
mc_kibel, please, fix it for db2020

Patcher

 

Tried this?

Patcher

 

Sotik11, v2.1 Does not work on K800K810. I have tried everything that mc_kibel has suggested without success.

Patcher/Elfmaker

 

How can I fix that if it's working 100% correctly on my K770i ?

Here's the proof: http://www.sendspace.com/file/57xi2r (open by QuickTime for example)

I'll try to catch someone with K800 and I'll check everything :) I'll use all my magic power

[ Edited by mc_kibel в 16.7.10 17:56 ]

[ Edited by mc_kibel в 16.7.10 17:56 ]