Patcher/Elfmaker

 

Welcome!

After very very long break with developing ClearBass elf, I decided to completely rewrite this elf.

I fixed ALL bugs and improved some things. In this version:
- Saving last preset and restoring it after restart of player (you don't have to set preset everytime )
- When you go to equalizer, you will see last opened equalizer and last presets
- SWFs are not used anymore!
- Support for DB2020, DB3150, DB3210

Comparing to older DB2020 version, there are some more important changes:
- Now only one elf is working, not three (it was manager, manual, presets)
- Affecting sound in real time (you don't have to press 'select' to hear the difference)
- Huge code optimization

Warning!
Needed events:
Код:
At the moment these are not preset in any A2's dyn_const.bin, so I spend some time for porting it. Dyn_const for DB3150v1 (ported by Madfish) / DB3150v2, DB3210 and DB2020 in attachment.

1. Installation
- First of all - remove everything connected with old version!
- Install patch:
Код:

Here's ASM for porters:

- Download ClearBass.elf and place it to ZBin or Daemons
- Download equalizer.zip
- Exract it, place all files from archive to /Zbin/Config/Equalizer [phone memory]
- Download Equalizer_Display_QVGA.zip - put Equalizer_Display.xml from this archive to /Zbin/Config/Equalizer [phone memory]
- Run elf

2. Usage
- Start music
- Press more -> settings -> equalizer
- That's all, now you can play as long as you want :D




3. Replacing ClearBass presets (creating EQS files) - Optional, not necessary
- Let's take a look at this screenshot:


- Let's create EQS file with this preset. We can see:
-->> in 1st band: 14
-->> in 2nd band: 14
-->> in 3rd band: 4
-->> in 4th band: 5
-->> in 5th band: 6

- Count: visible level - 8 + 20
- In this case:
-->> for 1st band: 14 - 8 + 20 = 26
-->> for 2nd band: (same as first) 26
-->> for 3rd band: 4 - 8 + 20 = 16
-->> for 4th band: 17
-->> for 5th band: 18

- Convert value to hex
-->> for 1st band: 0x1A
-->> for 2nd band: 0x1A
-->> for 3rd band: 0x10
-->> for 4th band: 0x11
-->> for 5th band: 0x12

- Write values into file by WinHex:


- Save file as PresetX.eqs (number of preset instead of X, 1-9), then put it to ZBin/Config/Equalizer in phone memory.

Changelog:



[ Edited by mc_kibel в 20.7.10 19:57 ]

Elfmaker

 

new Clear Bass is very nice :D

Пользователь

 

this is very goog Elf =D


Предупреждение от ploik
Нарушение правил:
5.3.18. Набирание "пустых" сообщений и/или нелогичное поднятие старых тем.

Новичок

 

У меня опять зависает при входе в еквалайзер, теперь даже передёрнуть батарею не помогает. Делал вроде все правильно скинул ети три файла ClearBass_v2.4.elf, Equalizer_Display_QVGA.zip, Equalizer.zip, запихнул куда положено ClearBass_v2.4.elf в Deamons на карту памяти, а Equalizer_Display_QVGA.zip, Equalizer.zip распаковал в папку usb/ZBin/Config/Equalizer, перед етим всё с папки Equalizer, ошибок никаких не выдает, только зависает. Может кто знает в чем проблема?

Patcher/Elfmaker

 

Music must be started when you enter equalizer. Maybe this is a problem ? :D

Опытный

 

ORFEO, если что, патч для первой версии надо откатить, а поставить только для второй

Новичок

 

mc_kibel, give the events for self assembly of dynconst, please (UI_MEDIAPLAYER_AUDIO_PLAYING_TIME_EVENT and UI_MEDIAPLAYER_CREATED_EVENT for db3150v1)... if not difficult. thks.

Новичок

 

mc_kibel писал:


Since this is even worse when I turn on the music, she plays a few seconds and hangs on.

xGhost писал:

Я для первой в глаза не видел

Patcher

 

ORFEO, Потанцуй с бубном) ... перезапусти эльф, обнови плейлист, запусти музыку, потом открывай эквалайзер... я такое проделал, запустился.

Пользователь

 

mc_kibel, At w660 displayed statusbar

Вникающий

 

Выложите кто нибуть XMl для v. 2.4