Developer

 

Free Time Info
(c) myrzeug

With this elf you can display the free time of your phone at any time, as well as the value in the seconds, minutes, hours, according to the tariffs that you set:



Automatically collects the time and operators name of number called, and this requires records of Call_logger
That means you MUST USE the Call_Logger.elf,
For version 2.1 of Call Logger, put in "Orde Sort" the option "LIFO".

The names of the companies, must be the same configured for the Call_logger on file regions.ini

Options:
* You can upgrade the MONEY in every monthly, for those who use a "PLAN" service
Or set it manually, for those who use "CHARTER" service
* You Can set numbers to be ignored, that is not taxed for operator, such as the service numbers, exemple (FTI.ini):

Код:
* You can create up to 5 different rates for 5 different operators (the "Default" is the default operator, that is, if the number you call is not recognized in regions.ini or FTI.ini, the cost of the call will be calculated with this fare.)

Note:
the values of: MONEY and TARIFFS are in the same UNIT
For smaller fractions, you must use the parameter FACTOR (Is not possible to put float numbers on .bcfg file...), exemple:

if MONEY = 12,54 $ and TARIFF_1 = 0,075 $, you must put in .bcfg:
MONEY = 12540
TARIFF_1 = 75
FACTOR = 1000


-------------

Free Time Info v.1

Needs the events:
Код:

-------------

Free Time Info v1.1
* UI_STANDBY_UNFOCUS_EVENT and PHONE_IN_STBY_EVENT are no longer needed
You just need the event :ON_CALLMANAGER_EVENT_TAG

* Bcfg support added, for BM with this support...

* Small change in the parameter FACTOR, to put fractions easiest...









[ Edited by myrzeug в 19.11.08 17:36 ]

Patcher/Moder

 

myrzeug,
автору на будущее.
Запомни и следующий раз не путай юзеров.
На DB 2010 эта константа называется PHONE_IN_STBY_EVENT 0x????
На DB 2020 эта константа называется STANDBY_IDLE_EVENT 0x084C (for W610 R6...)

Вникающий

 

На К790 через DCE.elf попробовал добавить 0х84С и эльф заработал... Но, одного не понял, когда счет пополню, мне в конфиге его самому дописывать придется или он сам обновится?

Expert

 

А как быть если первая минута по одной цене а остальные по другой?
Да ещё и в инет с этой симки выходишь?

Elfmaker

 

myrzeug пишет:


myrzeug, I suggest you to use code like



See my post in the MoonPhase thread for an explantation.

Developer

 

eddmund
Nice, Your method is interesting
But, in fact, at present, all db2010 using this event:PHONE_IN_STBY_EVENT
and the DB2020 this:STANDBY_IDLE_EVENT

Maybe it is easier to use: GetChipID ()...

Anyway, I already had resolved the problem in my elf, now works without this event
No event is needed to determine when it is in the standby
Код:
I just forget to publish the latest version :P

Now is present in the first post

[ Edited by myrzeug в 20.11.08 05:25 ]

VIP Developer

 

myrzeug,
maybe it's better to check both events?

Developer

 

IronMaster

Now, it's no longer need any event
(works fine only with ON_CALLMANAGER_EVENT_TAG)

[ Edited by myrzeug в 19.11.08 17:34 ]

Elfmaker

 

No, please don't believe the mystery that the constant for the Standby Mode event has anything to do with the platform. There is no need to make use of the additional function to get the platform ID. Nonsense. The values of the STANDBY_IDLE_EVENT and PHONE_IN_STBY_EVENT constants are absolutely identical. The problem is only that the DYN_CONST.bin file for some models may only have one of them defined. Others have both defined. For example, look into W580_R8BE001.h or W880_R8BA024.h of svn://svn.boba.su/SE/dynconst/target/

Код:

Your new method does not work for me. Even if it would work, I see no advantage because it costs using additional 4 functions.

[ Edited by eddmund в 19.11.08 17:23 ]

Developer

 

The difference is that, in my elf, the information is displayed when you press a button, and I could verify if we are in estandby directly
Otherwise it would be necessary to use a function ModifyUIHook and an addicional variable to identify/fix some problems as when you unlocks the keypad (In the previous version, when you unlock the keypad and you pres the buton, nothing happens)

In my case it is more efficient in this way